About Vitreous Glass Mosaic Tiles
Glass mosaic tiles come in several types. You are to decide which is the best for your project. It is also possible that you can mix varieties. As they have standard size, there will be no problem .
The most economical glass mosaic tile of all is vitreous type and it is also the most common type of glass mosaics. Vitreous glass mosaics are cheap tiles. They are not only extremely popular with amateur crafters, but also preferred by professional mosaic artists very often, especially for large installations in buildings. This type of glass mosaics have a grainy stone-like (vitreous) texture and they are opaque, cut easily. This variety of glass mosaic tile is often called "Venetian".They are commonly available as arts and crafts tiles on the market.
Each vitreous glass mosaic tile can be found in 1cm x 1cm or 2cm x 2 cm. A full pallet of colours are available and this allows the artist to create amazingly beautiful mosaics. Vitreous glass mosaics come in a wide range of colours so you can find almost all types of colours from the brightest striking reds and oranges to whites and some really subtle shades. Using tile nippers they are easy to cut and can be used for both indoor and outdoor places successfully.
So why don’t you start with “accents”? Adding accents to your kitchen or bathroom will create a supreme “wow” factor. The glass mosaics will give some flare and look like shining diamonds on your wall. And the best part of adding glass tile accents is it is so cheap and easy to use.
Direct Method of Mosaic Construction
The direct method of mosaic construction is to work directly onto the supporting surface. The mosaic artist places gluing the individual mosaic tiles onto the surface. This method is well suited to vases and similar sort of surfaces that have a three-dimensional quality. Glass mosaic tiles can also be used.
First of all, underdrawings of the mainline outlines of mosaic patterns are made on the wall below. These underdrawings are revealed again if the mosaic falls away. This direct method was used for the historic European wall and ceiling mosaics.
The direct method suits transportable small projects. As the artist has to work directly at the chosen surface, which is often not practical for long periods of time, it is considered unsuitable for large scale projects. It is also difficult to control the evenness of the finished surface with the mosaic design. This is important when creating a functional surface especially such as a floor or a table top.
“Double Direct” method is a modern version of the direct method. Double Direct method involves working directly onto fiberglass mesh.
The mosaic can then be constructed with the design visible on the surface and transported to its final location. Large work can be done in this way, with the mosaic being cut up for shipping and then reassembled for installation.So the artist can work in comfort in a studio rather than at the site of installation.
