Home | Leisure & Hobbies | Other Hobbies
So what's a hovercraft and how does it work? A hovercraft is a platform vehicle that glides with air cushion. Simply put, instead of wheels, the principles of physics and fluid mechanics are used. Not as simple as it sounds? But really it is simple. In building a hovercraft, you don't have to worry about the applied science that it adheres into. You just need to know the three basic things. Simply put, it means that you'll be using three major elements and put them together to make a hovercraft. These three major elements are: 1. Platform or hoverboard 2. Skirt to cause air cushion 3. Air Vents Once you have all the three parts ready to put them together. But first, it is important to know why these parts are important. The platform or hoverboard is where you're supposed to be sitting on. This is the vehicle. For the board to fly and glide, its surface area facing the ground should bear enough air cushion to support it. Building a hovercraft requires you to allow that pressurized air to reside underneath that platform. To do that, you should bore strategic holes in it to cause a thick air film to build below. Since molecules of air are more loose and spacious than liquid molecules, the former disperse faster. To create the cushion of air, it should be controlled below the hoverboard. This means there should be a means to trap the air temporarily to build enough pressure to lift a weight up. This air trap design is called a skirt. This is the most important element in building a hovercraft. It delays the release of air thus creating a lift. The third major part of the hovercraft is the air vent. These are simply holes on the platform. This should allow air to pass through. Part of building a hovercraft is the installation of fans. A fan builds a gush of concentrated air. The put that air power to productive use, you need to place them in the best strategic place where the vents are. The vents will lead the air underneath the platform surface thus building cushion. Other things you may add to your hovercraft are: - The Propellers - In a standard commercial hovercraft, propellers are usually the big fan you see attached behind the craft. Bigger units have more propeller fans. - Rudder - It functions like those in airplanes for maneuvering and the steering wheels for cars. It's that thin vertical panel closely placed beside the propeller. The rudder and the propellers are simply added features for a hovercraft. Especially if you want a hovercraft that seriously gets you places quicker, you need to have huge propeller fans and rudder. The latter allows you to steer the direction of your hovercraft. If you only opt to have a simple ride in your backyard or lawn, don't fancy it too much. The three elements above should do fine. As long as your ship lifts up and can carry your weight, then you got the specs right. If you got kids at home, you can take turns in riding the homemade hovercraft and push it to move forward. That should be more fun than the propeller and rudder installed. So when you get all these things in building a hovercraft project done, you should be ready to go.
Provided by ArticleGOLD: Articles Directory - Article Directory
About the Article Author
What else do you need to find out regarding how to make a hovercraft? Know the technical and engineering side of building a hovercraft.
Please Rate this Article
5 out of 54 out of 53 out of 52 out of 51 out of 5
# of Ratings = 2 | Rating = 5/5
